Fan with colors of corrugated paper

This master class is a detailed description of making beautiful home decorations. The fan is simple and easy to perform. It can also be a wonderful gift for friends and acquaintances.
 fans with colors of corrugated paper
For work we need: - skewers. - beads. - glue gun with silicone rods. - corrugated paper blue, blue, white. - floristic mesh. - foil. - scissors. - thread. - chain. Let's get to work. We start with the manufacture of the basis of the fan. For this we take the skewers. They need 14 pieces.
 we take the skewers
For the base we will use the color blue. We take the blue corrugated paper and cut the strips across the fibers. With a size of 1x15 cm. We cut them off as much as the cuts. Stretch the strip to the limit.She will wrap a skewer.
 wrap the skewer
 to wrap a skewer
With a glue gun we glue the strip to the skewer. In this case, we tighten as tightly as possible. Twisting the strip in a spiral around the skewer.
 to wrap a skewer
Let's prepare all the necessary skewers. We need 14 skewers.
 wrap skewer
Start collecting the base. We take the skewers and glue them to each other, at an angle of 45 degrees. We glue everything firmly.
 we stick a strip with a gun
 glue a strip with a gun
Now you need to glue the bottom of the fan . To do this, take a strip of blue paper measuring 2x5 cm. And stretch it completely. And glue the bottom. So, to close the connection between the skewers.
 glue a strip with a gun
Then we proceed to the beads.We take beads of blue color, the number corresponds to the skewers. We glue each bead on the sharp edge of the skewer.
 glue on the sharp
 glue on the sharp
Here's what we will succeed. We glued all the beads.
 pasted all the beads
Now let's go to the floral pattern. Which is also blue. Take a piece of size 30x30 cm. And tightly cover it with skewers. To make it easier to work, we pass the skewers with beads into the holes of the mesh. We glue to the bottom base, and glue each skew to the mesh well. When the glue dries and the mesh will firmly hold on the base of the fan, proceed to the correction. We cut the unnecessary edges of the mesh.
 pasted all beads
 glued all the beads
Let's proceed to making flowers. They will be three sizes. And for each flower will need petals of two sizes. Big blue - 3x5 cm 4 pieces, and 5x5 cm three pieces. Average blue - 3x4 cm four and 4x4 cm 3 pieces.Small white flowers - 2x3 four, 3x3 three pieces. Let's go back to the big blue colors. We cut strips of the necessary sizes. Cutting the corners on the stripes, giving the shape of a petal.
 We proceed to making flowers
Using a skewer or knitting needles, we twist the edges of the petals. And with our fingers we stretch the paper a little, making a groove in the middle.
 corrugated paper flowers
Start making bud. To do this, take the foil size of 10x10 cm and roll it into a ball. Now we take one of the four petals and turn a foil ball into its middle. We knit the resulting bud.
 flowers from corrugated paper
Then we start to glue the petals to the bud. Starting with small ones.
 corrugated paper flowers
Thus, we glue the remaining petals of small and large sizes.
corrugated paper flowers
 corrugated paper flowers
 corrugated paper flowers
These big roses we will need three pieces . There are also middle blue ones 3. And there are four small ones.
 corrugated paper flowers
corrugated paper flowers

We glue large roses together.
 flowers of corrugated paper
Then glue these roses on the base. We give the glue to dry well.
 corrugated paper flowers
Now take the small white flowers and glue them on both sides down to the base under the large flowers.
flowers of corrugated paper
Then take the middle blue roses andwe glue them in staggered relatively large roses.
 fans with colors of corrugated paper
The time has come for the remaining two small white roses, glue them between the blue.
 fans with colors of corrugated paper
There is a final touch. Need to secure the chain. To do this, take the blue paper, cut off from it two strips of 1x2 cm in size. Straighten out and fold into a straw. We glue it so that it does not spin. Then press it to make it flat. We glue the strings to these strips. Then glue these strips to the base. In a suitable place, we attach strips with a chain to the skewers on the back of the fan. All is ready.
 fans with colors of corrugated paper
Good luck to all.

Related News:


Potato with Chicken and Mushrooms in Clay Pot Sauce
Gift box with your hands from cardboard: a diagram and a photo
Developmental textile book
Delicious dried tomatoes
Cork Wobbler