Removal of bitumen stains from a car body

Bitumen stains on the paintwork of the car - this is a real problem, which must be dealt with in a timely manner. Particularly active body is contaminated with tar with the onset of heat, when the road builders begin their favorite “pit repair”.
Removing bitumen stains from a car body
It’s good if the spots are small and they fly off from their own wheels. The example in the photo shows a tougher case. The car was left near the fossa. The road workers poured it with resin and left. Under the law of meanness, it was during this period of time that another car swept by, hit the wheel straight into a fresh resin puddle. In the spots there were doors, thresholds, a wing, glass and a little roof ...

Than and how to remove bituminous stains?

Removing bitumen stains from a car body
The cheapest, affordable and quite safe means for effectively dealing with tar on a car body is kerosene. You can buy it in hardware stores.He usually stands in bottles among solvents. They, by the way, can also be used to remove bitumen contaminants. But there are more expensive solvents than kerosene.
Removing bitumen stains from a car body
As an alternative, motorists use other tools that happened to be in the garage at hand. It's about gasoline, diesel fuel and, of course, about WD-40 (or similar). All these liquids also do an excellent job with tar, but again, they cost more than kerosene. In addition to the means for dissolving bitumen stains, you will also need car shampoo. Traces of kerosene will need to be washed off, and ordinary water can not cope with this. To protect the paintwork in the future, it is recommended to treat the body with special wax. For cleaning, you also need a piece of thick foam rubber, clean rags and kerosene dishes.
Removal of bitumen stains from a car body
The process of removing bitumen stains begins with the fact that they must be abundantly moistened with the means that is chosen.Diligent rubbing with rags will not help here. The main task is to dissolve the hardened resin. After wetting the stains should be easily wiped off with a cloth soaked in kerosene. It is not desirable to rub hard, as there is a risk to make a matte layer of varnish.
Removing bitumen stains from a car body
If a stain does not give in, it is better to return to it in a few seconds when it dissolves better. After these measures, clean rags are taken, and with its help dry all the remnants of resin and kerosene are wiped out. The treated place is carefully inspected. If some spots are missed, the process repeats.
Removing bituminous stains from the body of a car
After removing bituminous contaminants, you must thoroughly wash the car body. Standard car shampoo will cope with greasy traces of kerosene.

Tips for car enthusiasts

For this topic, many simple car owners can benefit from the following simple recommendations:
  • Bitumen stains should be removed in a timely manner. The longer the resin is on the paintwork, the more difficult it is to remove.
  • Do not rub bitumen stains hard. The key to success lies in dissolving, not in mechanical action.
  • Do not rush to buy a "special" agent in the car store to remove bitumen stains. Its efficiency is commensurate with kerosene, and the price can be ten times higher.
  • To protect the paintwork in the future, use waxes regularly. Resins, dirt, dust, and bird droppings adhere to them worse.
  • Do not attempt to wash the resin with excessively aggressive solvents. This may damage the paintwork.


Related News:


Released the second trailer for the series The story of the maid
Doll Shrovetide do-it-yourself made of paper
How to germinate seeds for seedlings in 24 hours
Technique of planting fruit trees seedlings
Antenna for smartphone in 3 minutes
Red and white fish terrine with vegetables