Leaf holder

For the manufacture of tacks textile pieces of different shades of green are useful. According to the composition of the fabric can both natural and synthetic. The main thing is that they are combined with each other in terms of density, properties and appearance. It will also require a sintepon with a density of 150-200 grams per square meter, a slanting green beech, a bead in the form of a half-shell, two kinds of ribbons for the loop and decorative bow, threads for the color of the fabric, glue for gluing the bow and beads. Before you can cut out the details of the tack, you need to do two things: first, prodekatirovat all the fabric, that is, iron it with steam, and secondly, from paper or cardboard to make a pattern potholders in the form of a sheet of wood. Its dimensions and shape can be arbitrary.  Pothook in the form of a leaflet
From the prepared pieces of fabrics, it is necessary to cut strips 4 cm wide and of any length, The end cut of each strip should be cut 45 degrees.This requires the design and specificity of the tacking assembly.
 Tack in the form of a leaflet
Cut open strips should be sewn together with a seam 1 cm wide, starting assembly from the corners , as shown in the photo. Periodically, a tack pattern should be applied to the stitched canvas and checked to see if it is already included or not.
Tack in the form of a leaflet
The assembled canvas should be carefully ironed, guiding the seam allowances in one direction. On the pattern should be outlined and cut the detail in the form of half a sheet. Similarly, you need to collect and soul mate.
 Potholder in the form of a leaflet
You must sew the halves of the tack together with a seam 1 cm wide. Allow the seam allowances to be ironed out. .
 Tack in the form of a leaflet
After this, the front part of the tack should be quilted on a padding polyester. For convenience, you can start to prick a part on a synthetic winterizer with the help of safety pins, then lay the finishing lines on each seam of the part and on the perimeter,and then remove the pins. Surplus of the padding polyester should be trimmed.
 Tack in the shape of a piece of paper
From the available patches you need to cut out the wrong side of the tack. You can make it whole, cut into two parts, or exactly the same as the front side - it all depends on the desire and capabilities of the needlewoman. The front and back sides of the tack should be cleaved together with pins.  Tack in the form of a leaflet
 Tack in the form of a leaf


Related News:


Creative Gift
Abstract Christmas ball
How to choose the right curtains in a small apartment
Do-it-yourself document covers
Three-phase motor star and triangle wiring